"THE CREEP MACHINE" SPORTSTER

SO FAR WHAT I HAVE GOTTEN DONE ON MY TWO WHEELED FREEDOM MACHINE. THE WHEEL SPACERS WHERE TURNED DOWN ON THE LATHE AND ARE HAND MADE OUT OF BRASS. FIGURED THAT THE SPACERS DON'T HAVE TO BE BORING. NEXT UP I STARTED ON THE HEADLIGHT MOUNT AND EYEBROW. I HAVE ALWAYS WANTED TO TRY THIS OUT. GUESS NOW IS AS GOOD A TIME AS ANY TO TRY. I TOOK AN OLD HARLEY DAVIDSON SPORTSTER EYEBROW, STARTED SHAVING AND WELDING ON IT TO FIT THIS TRIANGLE LIGHT FROM THROTTLE ADDICTION. IN ORDER TO HAVE THE LIGHT SIT IN THE RIGHT LOCATION I HAD TO HAVE A FEW PARTS MACHINED LIKE THE TOP FORK CLAMPS AND LIGHT ATTACHMENT. I MADE STAINLESS STEEL SPACERS TO DROP THE EYEBROW DOWN 2". ADDED A STEER STABILIZER FOR THOSE HIGH SPEED CORNERS. DON'T WANT THIS GIRL GETTING AWAY FROM ME.

FOR ALL YOUR FABRICATION NEEDS:
DUNLOPCUSTOMS@GMAIL.COM
602-515-2285

CUSTOMER PICS

8" CLASSIC Z BARS

REAR BRAKE STAY

HIGH NECK FRAME/SISSY BAR/ OIL FILTER MOUNT

FORD SUPER DUTY ROCK SLIDER / STEPS

THE WORK HORSE GOT SOME BOLT ON PROTOTYPE SLIDER/STEPS LAST WEEK. THESE BABIES ARE BUILT OUT OF 4" X 2" X .188" USA MADE STEEL. THESE ARE VERY SOLID STEPS. JESSUP GRIP TAPE WAS APPLIED TO THE COATED FINISH TO ADD A NONE SLIP TEXTURE. 

FOR ALL YOUR FABRICATION /WELDING NEEDS
EMAIL DUNLOPCUSTOMS@GMAIL.COM

1998 - 2000 FORD SUPER DUTY ADJUSTABLE TRACK BAR

THIS OFF ROAD TRACK BAR WAS DEVELOPED FOR THE 1998 - 2000 FORD F250 SUPER DUTY POWERSTROKE. IT IS FULLY ADJUSTABLE FROM A 1" LEVELING KIT ALL THE WAY UP TO A 3" LIFT. THIS BAD BOY IS BUILT WITH 100% USA MADE DOM TUBING WITH ADJUSTABLE HEIM JOINTS 3/4" TO 7/8" WITH STAINLESS STEEL MACHINED MISALIGNMENT SPACERS. THREADED ENDS FULLY TIG WELDED. FINISHED PRODUCT WILL HAVE TWO COLOR POWDER COAT CHOICES. SILVER OR BLACK. $275. 

EMAIL DUNLOPCUSTOMS@GMAIL.COM TO GET YOURS TODAY.

SPORTSTER XR 1200 STAINLESS EXHAUST BUILD

JUST WHIPPED UP A LITTLE 304 STAINLESS EXHAUST FOR THIS HARLEY DAVIDSON XR 1200. I THINK IT TURNED OUT PRETTY SWEET IF YOU ASK ME. ITS DIFFERENT FROM MOST PIPES I HAVE SEEN ON THIS SORT OF BIKE.  NOW OFF TO THE DYNO TO GET IT TUNED IN. 

FOR ALL YOUR WELDING AND FABRICATION NEEDS.
DUNLOP CUSTOMS

HOME IMPROVEMENT WITH A BIT OF UPCYCLE

This project was for the side of my mom's house. She was looking for a way to spice up the side of her house with some kind of art. My pops and I teamed up to build this unique wall hanger. The idea was to upcycle some old .250" water jet sheets that had been laying around. The sheets measured in at 4 x 8 with all kinds of parts previously cut out of them. My pops and I designed this art in two pieces so that it would be easier to install and remove if ever need be. The frame was made from .250" A36 hot rolled flat bar. Behind the sheets are holes spaced every 16" so that we could mount directly to the studs. The paint was picked and painted by my mom. As time goes on and the weather starts to settle in on this piece it will change giving it a lot of character.

FOR ALL YOUR WELDING AND METAL FABRICATION NEEDS